Steps to Determining The Location of a Swimming Pool Leak

If you determine that your pool is losing water, first identify if your circulation system is the cause or is the water loss through a crack in the pool. This can be done by runing the pump for 24 hours, then leaving the pump off for 24 hours and noting how far the water dropped during each scenario. Waterfalls and fountain play a large role in water loss so leave them off during this process. If water loss is the same in both scenarios you have determined a leak in the pool structure. If water loss is significantly greater or less when pump is running, there is a good chance the leak is in the plumbing or pool equipment.



Step two.

• If in the above scenario you determine the pool itself is leaking, simply shut off the pool and allow the water to drop. Once the water level stops dropping, look for cracks or gaps in plaster.


• If water stops at the light, the lines behindthe fixture could be cracked.
  If the water drops below the light, then there may be a leak in the drain at the bottom the pool.

Step Three.

• If you suspect you have a leak in the filtration system these clues may help you pinpoint the location:


• If you see bubbles in the return water when the pool's pump is running, it's likely there's a leak in the suction side of the filtration system.


• If the pool is losing more water while running the pump, then water is being lost on the return side of the system.

If you have moved into step three and the leak is on the suction side of the system, have your swimming pool proffetional come out to identify the problem. Remember if you are local to Dallas you can contact Swim Clear Pool Service.

If you have moved into step three and the leak is on the return side but you do not see any evidence of leaks around your equipment, we at SCPS recommend contacting American Leak Detection

Swimming Pool Leak or Normal Water Loss?

With 100 degree temperatures water loss in a swimming pool is inevitable. However, are you loosing water due to evaporation or a leak?

A typical pool will loose about a 1/4 inch of water a day due to evaporation. Other factors that can play a role in the loss of swimming pool water is splash out, waterfalls and fountains. If you are loosing more water than you believe you should be, here are some tips on what to look for.

• Algae or other persistent water quality problems indicating imbalances in the chemistry can occur when a leak prevents the water level from staying constant;
• Loose tiles or cracks in the pool deck;
• Cracks inside of skimmers;
• Cracks and gaps in the Plaster (sometimes followed with rust spots coming from the cracks); or
• Water-saturated soils in the area around the pool, pool pumps or plumbing.

One of the most common ways to identify if you have a leak is the bucket test.

The bucket test: Place a bucket filled with pool water on a pool step (weight it with a rock or brick). Mark the water level on both the inside and the outside of the bucket. The starting point levels should be about the same. Keep all fountains and waterfalls off and pool unused for 24 hours. Check the mark 24 hours later. If there's a greater drop in the line on the outside of the bucket, a leak in the pool is indicated.

Follow our post for steps on determining the location of your swimming pool leak.

These posts brought to you from Swim Clear Pool Supply and Swim Clear Pool Service

Swim Clear Pool Supply Joins Facebook

Stay in touch with Swim Clear Pool Supply updates now on Facebook. Just search for Swim Clear Pool Supply and become a fan. We look forward to seeing you there!!!

Three Awesome Ways To Clean Those Dirty Swimming Pool Tiles

Tired of the dirty, scaly, dingy tiles around your swimming pool? How about the white mustache coming from the spa overflow or the swimming pool water falls. Swim Clear Pool Supply has a solution.

The easy to use stain removers eliminate most types of stains and deposits including: rust, calcium scale, calcium deposits and many other stains. They will not scratch or gouge (when using proper eraser on appropriate surface). Use by hand or attach to any standard telepole.

The Stain Eraser shown to the right is perfect for the organic stains on the swimming pool surface like leaves, dirt or crape myrtles. This can also be used to clean your tile from the oily residue left from suntan lotions or tree pollen.

The Pumice stone shown here in the center of the page is an easy to use hand held tile cleaner. Just like the stain eraser, the Pumice Stone is perfect for the oily residue left from suntan lotions and tree pollen.

And to your left is the ultimate calcium fighter the Kalcium Killer. Provides instant results and makes cleaning the calcium off your tile much quicker then waiting for the harsh chemicals to dissolve them. Uses no chemicals and works wet or dry.

5 Easy Steps to Summer Time Swimming Pool Care

1. Swimming pool equipment should be running at a minimum of 8hrs per day and during hottest part of the day.

2. Check chemical levels daily. At a minimum check sanitizer and P.H. every day, Alkalinity 1 time per week, and all other tests should be at least monthly.

3. Add chemicals as needed and shock once per week regardless of your sanitizer level.

4. Follow your routine maintenance schedule. If you need help here visit the post "10 steps to maintain your swimming pool"

5. Maintain appropriate water level. With the heat comes usage of pool meaning splash out, and heavy evaporation. Low swimming pool water can lead to pump damage and other costly problems like algae.